GST Registration Guide to GST Chapter 76 | Get Enrolled Now
Important Notes for GST Chapter 76 of GST Registration
In this Chapter and, on account of Notes (d), (e) and (f) all through this Schedule, the accompanying articulations have the implications thusly doled out to them:
Pig Iron:
Iron-carbon compounds not helpfully flexible, containing over 2% by weight of carbon and which might hold by weight at least one different components inside as far as possible:
- Not over 10% of chromium
- Not over 6% of manganese
- Not over 3% of phosphorus
- Not over 8% of silicon
- An aggregate of not over 10% of different components.
Spiegeleisen:
Iron-carbon composites containing by weight over 6% yet not over 30% of manganese and in any case adjusting to the determination at (a) above.
Ferro-compounds:
Compounds in pigs, squares, bumps or comparable essential structures, in structures got by consistent projecting and furthermore in granular or powder structures, whether or not agglomerated, normally utilized as an added substance in the production of other amalgams or as de-oxidants, de-sulphurising specialists or for comparative uses in ferrous metallurgy and for the most part not helpfully pliable, containing by weight 4% or a greater amount of the component iron and at least one of the accompanying:
- over 10% of chromium
- over 30% of manganese
- over 3% of phosphorus
- over 8% of silicon
- an aggregate of over 10% of different components, barring carbon, dependent upon a greatest substance of 10% on account of copper.
Steel:
Ferrous materials other than those of heading 7203 which (except for specific sorts delivered as castings) are conveniently pliable and which contain by weight 2% or less of carbon. Notwithstanding, chromium prepares may contain higher extents of carbon.
Tempered steel:
Composite prepares containing, by weight, 1.2% or less of carbon and 10.5% or a greater amount of chromium, with or without different components.
Other combination steel:
Prepares not consenting to the meaning of tempered steel and containing by weight at least one of , following components in the extent shown:
- 3% or a greater amount of aluminum
- 0008% or a greater amount of boron
- 3% or a greater amount of chromium
- 3% or a greater amount of cobalt
- 4% or a greater amount of copper
- 4% or a greater amount of lead
- 65% or a greater amount of manganese
- 08% or a greater amount of molybdenum
- 3% or a greater amount of nickel
- 06% or a greater amount of niobium
- 6% or a greater amount of silicon
- 05% or a greater amount of titanium
- 3% or a greater amount of tungsten (wolfram)
- 1% or a greater amount of vanadium
- 05% or a greater amount of zirconium
- 1% or a greater amount of different components (aside from sulfur, phosphorus, carbon and nitrogen), taken independently.
Remelting scrap ingots of iron and steel:
Items generally cast as ingots without feeder-heads or hot tops, or of pigs, having clear surface issues and not conforming to the substance sythesis of pig iron, spiegeleisen or ferro-amalgams.
Granules:
Results of which under 90% by weight goes through a sifter with a lattice gap of 1 mm and of which 90% or more by weight goes through a strainer with a cross section opening of 5 mm.
Semi-completed items:
Constant cast results of strong area, whether or not exposed to essential hot-rolling; and different results of strong segments, which have not been additionally worked than exposed to essential hot-rolling or generally molded by fashioning, including spaces for points, shapes or segments.
These items are not introduced in loops.
Level moved items:
Moved results of strong rectangular (other than square) cross-segment, which don’t adjust to the definition at (ij) above as:
- curls of progressively superimposed layers, or
- straight lengths. which if of a thickness under 4.75 mm, are of width estimating somewhere multiple times the thickness or then again if of a thickness of 4.75 mm or more are of a width which surpasses 150 mm and measures to some degree two times the thickness.
Level moved items remember those with designs for alleviation got straightforwardly from rolling (for instance, grooves, ribs, chequers, tears, buttons and capsules) and those, which have been punctured, ridged or cleaned, given that they don’t in this way accept the personality of articles or results of different headings. Level moved results of a shape other than rectangular or square, of any size, are to be named results of a width of 600 mm or more, given that they don’t expect the personality of articles or results of different headings.
Bars and bars, hot-rolled, in unpredictably wound loops: Hot-moved items in sporadically wound curls, which have a strong cross-segment looking like circles. portions of circles, ovals, square shapes (counting squares), triangles, or other arched polygons (counting “straightened circles” and “changed square shapes”, of which two inverse sides are raised curves, the other different sides being straight, of equivalent length and equal). These items might have spaces, ribs, grooves or different distortions delivered during the moving system (supporting bars and bars).
Different bars and bars: Products which don’t adjust to any of the definitions at (ij), (k) or (1) above or to the meaning of wire, which have a uniform strong cross-area along their entire length looking like circles, sections of circles, ovals, square shapes (counting squares), triangles or other raised polygons (counting “straightened circles” and “altered square shapes”, of which two inverse sides the other different sides being straight, of equivalent length and equal). The items may:
- Have spaces, ribs, grooves or different disfigurements created during the moving system (building up bars and poles);
- Be turned subsequent to rolling.
Points, shapes and areas:
Items having a uniform strong cross-area along their entire length which don’t adjust to any of the definitions at (ij), (k), (1) or (m) be or to the meaning of wire.
Part 72 does exclude results of heading 7301 or 7302.
Wire:
Cold-shaped items in loops, of any uniform strong cross-area along their entire length, which don’t adjust to the meaning of level moved items.
Empty drill bars and poles:
Empty bars and poles of any cross-area, reasonable for drills, of which the best outer component of the cross-segment surpasses 15 mm however doesn’t surpass 52 mm, and of which the best inner aspect doesn’t surpass one portion of the best outside aspect. Empty bars and poles of iron or steel not adjusting to this definition are to be arranged in heading 7304.
Ferrous metals clad with another ferrous metal are to be named results of the ferrous metal prevailing by weight.
Iron or steel items acquired by electrolytic affidavit, by pressure projecting or by sintering are to be grouped, as per their structure, their sythesis and their appearance, in the headings of this Chapter suitable to comparative hot-moved items.
In this Chapter. the accompanying articulations have the implications thusly doled out to them:
Composite pig iron:
Pig iron containing, by weight, at least one of the accompanying components in the predetermined extents:
- over 0.2% of chromium
- over 0.3% of copper
- over 0.3% of nickel
- over 0.1% of any of the accompanying components:
- aluminum, molybdenum, titanium, tungsten (wolfram), vanadium.
- Non-amalgam free-cutting steel:
- Non-amalgam steel containing, by weight, at least one of the accompanying components in the predetermined extents:
- 08% or a greater amount of sulfur
- 1% or a greater amount of lead
- over 0.05% of selenium
- over 0.01% of tellurium
- over 0.05% of bismuth.
Silicon-electrical steel:
Composite prepares containing, by weight, essentially 0.6% however not more. than 6% of silicon and not over 0.08% of carbon. They may likewise contain by weight not over 1% of aluminum but rather no other component in an extent that would provide the steel with the qualities of another compound steel.
Rapid steel:
Compound prepares containing, with or without different components, no less than two of the three components molybdenum, tungsten and vanadium with a joined substance by weight of 7% or more, 0.6% or a greater amount of carbon and 3 to 6% of chromium.
Silico-manganese steel:
Combination prepares containing by weight:
- not over 0.7% of carbon
- 5% or more however not over 1.9% of manganese; and
- 6% or more yet not over 2.3% of silicon, but rather no other component in an extent that would provide the steel with the qualities of another combination steel.
For the characterization of ferro-composites in the sub-headings of heading 7202, the accompanying standard ought to be noticed.
A ferro-amalgam is considered as twofold and grouped under the applicable sub-heading (on the off chance that it exists) if by some stroke of good luck one of the composite components surpasses the base rate set down in Chapter Note 1(c); by relationship, it is co, the Idered separately as ternary or quaternary assuming a few compound components surpass the base rate.
For the use of this standard the unknown “different components” alluded to in Chapter Note 1(c) should each exec10% by weight.
Skelp implies hot-moved tight piece of width not surpassing 600 mm with rolled (square, somewhat round or inclined) edge.
Ferrous metals clad with another ferrous metal are to be named results of the ferrous metal prevailing by weight.
Iron or steel items acquired by electrolytic affidavit, by pressure projecting by sintering are to be arranged by their structure, their organization and their appearance, in the headings of this Chapter appmprialte to comparative hot-moved items.
| HSN Code | Description | Rate (%) | CESS (%) | Effective Date | Rate Revision |
| 7601 | UNWROUGHT ALUMINIUM | 18% | 01/07/2017 | ||
| 760110 | ALUMINIUM, NOT ALLOYED | 18% | 01/07/2017 | ||
| 76011010 | UNWROUGHT ALUMINIUM – ALUMINIUM, NOT ALLOYED : INGOTS | 18% | 01/07/2017 | ||
| 76011020 | UNWROUGHT ALUMINIUM – ALUMINIUM, NOT ALLOYED : BILLETS | 18% | 01/07/2017 | ||
| 76011030 | UNWROUGHT ALUMINIUM – ALUMINIUM, NOT ALLOYED : WIRE BARS | 18% | 01/07/2017 | ||
| 76011040 | UNWROUGHT ALUMINIUM – ALUMINIUM, NOT ALLOYED : WIRE RODS | 18% | 01/07/2017 | ||
| 76011090 | UNWROUGHT ALUMINIUM – ALUMINIUM, NOT ALLOYED : OTHER | 18% | 01/07/2017 | ||
| 760120 | ALUMINIUM ALLOYS | 18% | 01/07/2017 | ||
| 76012010 | UNWROUGHT ALUMINIUM – ALUMINIUM ALLOYS : INGOTS | 18% | 01/07/2017 | ||
| 76012020 | UNWROUGHT ALUMINIUM – ALUMINIUM ALLOYS : BILLETS | 18% | 01/07/2017 | ||
| 76012030 | UNWROUGHT ALUMINIUM – ALUMINIUM ALLOYS : WIRE BARS | 18% | 01/07/2017 | ||
| 76012040 | UNWROUGHT ALUMINIUM – ALUMINIUM ALLOYS : WIRE RODS | 18% | 01/07/2017 | ||
| 76012090 | UNWROUGHT ALUMINIUM – ALUMINIUM ALLOYS : OTHER | 18% | 01/07/2017 | ||
| 7602 | ALUMINIUM WASTE AND SCRAP | 18% | 01/07/2017 | ||
| 760200 | ALUMINIUM WASTE AND SCRAP | 18% | 01/07/2017 | ||
| 76020010 | ALUMINIUM WASTE AND SCRAP – ALUMINIUM WASTE AND SCRAP : ALUMINIUM SCRAP, NAMELY THE FOLLOWING : CLEAN ALUMINIUM LITHOGRAPHIC SHEETS (ISRI) NEW, CLEAN ALUMINIUM LITHOGRAPHIC SHEETS (ISRI)MIXED LOW COPPER ALUMINIUM CLIPPINGS AND SOLIDS (ISRI) CLEAN MIXED OL | 18% | 01/07/2017 | ||
| 76020090 | ALUMINIUM WASTE AND SCRAP – ALUMINIUM WASTE AND SCRAP : OTHER WASTE AND SCRAP | 18% | 01/07/2017 | ||
| 7603 | ALUMINIUM POWDERS AND FLAKES | 18% | 01/07/2017 | ||
| 760310 | POWDERS OF NON-LAMELLAR STRUCTURE | 18% | 01/07/2017 | ||
| 76031010 | ALUMINIUM POWDERS AND FLAKES – POWDERS OF NON-LAMELLAR STRUCTURE : ALUMINIUM POWDER FOR THERMIT PROCESS | 18% | 01/07/2017 | ||
| 76031090 | ALUMINIUM POWDERS AND FLAKES – POWDERS OF NON-LAMELLAR STRUCTURE : OTHER | 18% | 01/07/2017 | ||
| 76032000 | ALUMINIUM POWDERS AND FLAKES – POWDERS OF LAMELLAR STRUCTURE; FLAKES | 18% | 01/07/2017 | ||
| 7604 | ALUMINIUM BARS, RODS AND PROFILES | 18% | 01/07/2017 | ||
| 760410 | OF ALUMINIUM, NOT ALLOYED | 18% | 01/07/2017 | ||
| 76041010 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM, NOT ALLOYED : WIRE RODS | 18% | 01/07/2017 | ||
| 76041020 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM, NOT ALLOYED : BARS AND RODS, OTHER THAN WIRE RODS | 18% | 01/07/2017 | ||
| 76041031 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM, NOT ALLOYED : PROFILES : HOLLOW | 18% | 01/07/2017 | ||
| 76041039 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM, NOT ALLOYED : PROFILES : OTHER | 18% | 01/07/2017 | ||
| 76042100 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM ALLOYS : HOLLOW PROFILES | 18% | 01/07/2017 | ||
| 760429 | OTHER | 18% | 01/07/2017 | ||
| 76042910 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM ALLOYS : OTHER : HARD DRAWN BARE ALUMINIUM CONDUCTORS STEEL RE-INFORCED (A.C.S.R.) | 18% | 01/07/2017 | ||
| 76042920 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM ALLOYS : OTHER : WIRE RODS | 18% | 01/07/2017 | ||
| 76042930 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM ALLOYS : OTHER : BARS AND RODS, OTHER THAN WIRE RODS | 18% | 01/07/2017 | ||
| 76042990 | ALUMINIUM BARS, RODS AND PROFILES – OF ALUMINIUM ALLOYS : OTHER : OTHER | 18% | 01/07/2017 | ||
| 7605 | ALUMINIUM WIRE | 18% | 01/07/2017 | ||
| 76051100 | ALUMINIUM WIRE – OF ALUMINIUM, NOT ALLOYED : OF WHICH THE MAXIMUM CROSS-SECTIONAL DIMENSION EXCEEDS 7 MM | 18% | 01/07/2017 | ||
| 760519 | OTHER | 18% | 01/07/2017 | ||
| 76051910 | ALUMINIUM WIRE – OF ALUMINIUM, NOT ALLOYED : OTHER : OF WHICH THE MAXIMUM CROSS-SECTIONAL DIMENSION EXCEEDS 6 MM BUT DOES NOT EXCEED 7 MM | 18% | 01/07/2017 | ||
| 76051991 | ALUMINIUM WIRE – OF ALUMINIUM, NOT ALLOYED : OTHER : OTHER : HARD DRAWN BARE-SOLID | 18% | 01/07/2017 | ||
| 76051999 | ALUMINIUM WIRE – OF ALUMINIUM, NOT ALLOYED : OTHER : OTHER : OTHER | 18% | 01/07/2017 | ||
| 76052100 | ALUMINIUM WIRE – OF ALUMINIUM ALLOYS : OF WHICH THE MAXIMUM CROSS-SECTIONAL DIMENSION EXCEEDS 7 MM | 18% | 01/07/2017 | ||
| 760529 | OTHER | 18% | 01/07/2017 | ||
| 76052910 | ALUMINIUM WIRE – OF ALUMINIUM ALLOYS : OTHER : OF WHICH THE MAXIMUM CROSS-SECTIONAL DIMENSION EXCEEDS 6 MM BUT DOES NOT EXCEED 7 MM | 18% | 01/07/2017 | ||
| 76052990 | ALUMINIUM WIRE – OF ALUMINIUM ALLOYS : OTHER : OTHER | 18% | 01/07/2017 | ||
| 7606 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM | 18% | 01/07/2017 | ||
| 760611 | OF ALUMINIUM, NOT ALLOYED | 18% | 01/07/2017 | ||
| 76061110 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – RECTANGULAR (INCLUDING SQUARE) : OF ALUMINIUM, NOT ALLOYED : ELECTROLYTIC PLATES OR SHEETS | 18% | 01/07/2017 | ||
| 76061190 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – RECTANGULAR (INCLUDING SQUARE) : OF ALUMINIUM, NOT ALLOYED : OTHER | 18% | 01/07/2017 | ||
| 76061200 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – RECTANGULAR (INCLUDING SQUARE) : OF ALUMINIUM ALLOYS | 18% | 01/07/2017 | ||
| 760691 | OF ALUMINIUM, NOT ALLOYED | 18% | 01/07/2017 | ||
| 76069110 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – OTHER : OF ALUMINIUM, NOT ALLOYED : CIRCLES | 18% | 01/07/2017 | ||
| 76069120 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – OTHER : OF ALUMINIUM, NOT ALLOYED : ELECTROLYTIC PLATES OR SHEETS | 18% | 01/07/2017 | ||
| 76069190 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – OTHER : OF ALUMINIUM, NOT ALLOYED : OTHER | 18% | 01/07/2017 | ||
| 760692 | OF ALUMINIUM ALLOYS | 18% | 01/07/2017 | ||
| 76069210 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – OTHER : OF ALUMINIUM ALLOYS : CIRCLES | 18% | 01/07/2017 | ||
| 76069290 | ALUMINIUM PLATES, SHEETS AND STRIP, OF A THICKNESS EXCEEDING 0.2 MM – OTHER : OF ALUMINIUM ALLOYS : OTHER | 18% | 01/07/2017 | ||
| 7607 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED | 18% | 01/07/2017 | ||
| 760711 | ROLLED BUT NOT FURTHER WORKED | 18% | 01/07/2017 | ||
| 76071110 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : ROLLED BUT NOT FURTHER WORKED : ORDINARILY USED FOR TEA CHEST LINING | 18% | 01/07/2017 | ||
| 76071190 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : ROLLED BUT NOT FURTHER WORKED : OTHER | 18% | 01/07/2017 | ||
| 760719 | OTHER | 18% | 01/07/2017 | ||
| 76071910 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : ORDINARILY USED FOR TEA CHEST LINING | 18% | 01/07/2017 | ||
| 76071991 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : OTHER : PLAIN | 18% | 01/07/2017 | ||
| 76071992 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : OTHER : EMBOSSED | 18% | 01/07/2017 | ||
| 76071993 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : OTHER : PERFORATED OR CUT-TO-SHAPE | 18% | 01/07/2017 | ||
| 76071994 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : OTHER : COATED | 18% | 01/07/2017 | ||
| 76071995 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : OTHER : PRINTED | 18% | 01/07/2017 | ||
| 76071999 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – NOT BACKED : OTHER : OTHER : OTHER | 18% | 01/07/2017 | ||
| 760720 | BACKED | 18% | 01/07/2017 | ||
| 76072010 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – BACKED : ORDINARILY USED FOR TEA CHEST LINING | 18% | 01/07/2017 | ||
| 76072090 | ALUMINIUM FOIL (WHETHER OR NOT PRINTED OR BACKED WITH PAPER, PAPERBOARD, PLASTICS OR SIMILAR BACKING MATERIALS) OF A THICKNESS (EXCLUDING ANY BACKING) NOT EXCEEDING 0.2 MM – BACKED : OTHER | 18% | 01/07/2017 | ||
| 7608 | ALUMINIUM TUBES AND PIPES | 18% | 01/07/2017 | ||
| 76081000 | ALUMINIUM TUBES AND PIPE – OF ALUMINIUM, NOT ALLOYED | 18% | 01/07/2017 | ||
| 76082000 | ALUMINIUM TUBES AND PIPE – OF ALUMINIUM ALLOYS | 18% | 01/07/2017 | ||
| 7609 | ALUMINIUM TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES) | 18% | 01/07/2017 | ||
| 76090000 | ALUMINIUM TUBE OR PIPE FITTINGS (FOR EXAMPLE, COUPLINGS, ELBOWS, SLEEVES) | 18% | 01/07/2017 | ||
| 7610 | ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALU | 18% | 01/07/2017 | ||
| 76101000 | ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALU | 28% | 01/07/2017 | ||
| 761090 | OTHER | 18% | 01/07/2017 | ||
| 76109010 | ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALU | 18% | 01/07/2017 | ||
| 76109020 | ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALU | 18% | 01/07/2017 | ||
| 76109030 | ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALU | 18% | 01/07/2017 | ||
| 76109090 | ALUMINIUM STRUCTURES (EXCLUDING PREFABRICATED BUILDINGS OF HEADING 9406) AND PARTS OF STRUCTURES (FOR EXAMPLE, BRIDGES AND BRIDGE-SECTIONS, TOWERS, LATTICE MASTS, ROOFS, ROOFING FRAMEWORKS, DOORS AND WINDOWS AND THEIR FRAMES AND THRESHOLDS FOR DOORS, BALU | 18% | 01/07/2017 | ||
| 7611 | ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS, FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT | 18% | 01/07/2017 | ||
| 76110000 | ALUMINIUM RESERVOIRS, TANKS, VATS AND SIMILAR CONTAINERS, FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT FITTED WITH MECHANICAL OR THERMAL EQUIPMENT | 18% | 01/07/2017 | ||
| 7612 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT | 18% | 01/07/2017 | ||
| 761210 | COLLAPSIBLE TUBULAR CONTAINERS | 18% | 01/07/2017 | ||
| 76121010 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 76121020 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 76121030 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 76121090 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 761290 | OTHER | 18% | 01/07/2017 | ||
| 76129010 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 76129020 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 76129030 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 76129090 | ALUMINIUM CASKS, DRUMS, CANS, BOXES AND SIMILAR CONTAINERS (INCLUDING RIGID OR COLLAPSIBLE TUBULAR CONTAINERS), FOR ANY MATERIAL (OTHER THAN COMPRESSED OR LIQUEFIED GAS), OF A CAPACITY NOT EXCEEDING 300 L, WHETHER OR NOT LINED OR HEAT-INSULATED, BUT NOT F | 18% | 01/07/2017 | ||
| 7613 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS | 18% | 01/07/2017 | ||
| 761300 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS | 18% | 01/07/2017 | ||
| 76130011 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : LOW PRESSURE CYLINDERS : PLAIN | 18% | 01/07/2017 | ||
| 76130012 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : LOW PRESSURE CYLINDERS : LACQUERED | 18% | 01/07/2017 | ||
| 76130013 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : LOW PRESSURE CYLINDERS : PRINTED | 18% | 01/07/2017 | ||
| 76130019 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : LOW PRESSURE CYLINDERS : OTHER | 18% | 01/07/2017 | ||
| 76130021 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : HIGH PRESSURE CYLINDERS : PLAIN | 18% | 01/07/2017 | ||
| 76130022 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : HIGH PRESSURE CYLINDERS : LACQUERED | 18% | 01/07/2017 | ||
| 76130023 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : HIGH PRESSURE CYLINDERS : PRINTED | 18% | 01/07/2017 | ||
| 76130029 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : HIGH PRESSURE CYLINDERS : OTHER | 18% | 01/07/2017 | ||
| 76130091 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : OTHER : PLAIN | 18% | 01/07/2017 | ||
| 76130092 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : OTHER : LACQUERED | 18% | 01/07/2017 | ||
| 76130093 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : OTHER : PRINTED | 18% | 01/07/2017 | ||
| 76130099 | ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS – ALUMINIUM CONTAINERS FOR COMPRESSED OR LIQUEFIED GAS : OTHER : OTHER | 18% | 01/07/2017 | ||
| 7614 | STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED | 18% | 01/07/2017 | ||
| 76141000 | STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED – WITH STEEL CORE | 18% | 01/07/2017 | ||
| 76149000 | STRANDED WIRE, CABLES, PLAITED BANDS AND THE LIKE, OF ALUMINIUM, NOT ELECTRICALLY INSULATED – OTHER | 18% | 01/07/2017 | ||
| 7615 | All goods [other than table, kitchen or other household articles, of aluminium; Utensils] | 18% | 15/11/2017 | ||
| 7615 | TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM | 12% | 15/11/2017 – 1/07/2017 | ||
| 761510 | TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE | 12% | 15/11/2017 – 1/07/2017 | ||
| 76151011 | PRESSURE COOKERS | 12% | 15/11/2017 – 1/07/2017 | ||
| 76151012 | SOLAR COLLECTORS | 18% | 15/11/2017 – 1/07/2017 | ||
| 76151021 | NON-STICK | 12% | 15/11/2017 – 1/07/2017 | ||
| 76151029 | OTHER | 18% | 15/11/2017 – 1/07/2017 | ||
| 76151030 | OTHER TABLE,KITCHEN OR HOUSEHOLD ARTICLES | 12% | 15/11/2017 – 1/07/2017 | ||
| 76151040 | POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE | 12% | 15/11/2017 – 1/07/2017 | ||
| 76151090 | PARTS | 12% | 15/11/2017 – 1/07/2017 | ||
| 76151100 | TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM – TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PART | 12% | 15/11/2017 – 1/07/2017 | ||
| 761519 | OTHER | 18% | 15/11/2017 – 1/07/2017 | ||
| 761520 | SANITARY WARE AND PARTS THEREOF | 12% | 15/11/2017 – 1/07/2017 | ||
| 76152010 | TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM- SANITARY WARE AND PARTS THEREOF : SANITARY WARE OF A | 12% | 15/11/2017 – 1/07/2017 | ||
| 76152020 | TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM- SANITARY WARE AND PARTS THEREOF : PARTS | 12% | 15/11/2017 – 1/07/2017 | ||
| 76152090 | TABLE, KITCHEN OR OTHER HOUSEHOLD ARTICLES AND PARTS THEREOF, OF ALUMINIUM; POT SCOURERS AND SCOURING OR POLISHING PADS, GLOVES AND THE LIKE, OF ALUMINIUM; SANITARY WARE AND PARTS THEREOF, OF ALUMINIUM- SANITARY WARE AND PARTS THEREOF : OTHER | 12% | 15/11/2017 – 1/07/2017 | ||
| 7616 | OTHER ARTICLES OF ALUMINIUM | 18% | 01/07/2017 | ||
| 76161000 | OTHER ARTICLES OF ALUMINIUM – NAILS, TACKS, STAPLES (OTHER THAN THOSE OF HEADING 8305), SCREWS, BOLTS, NUTS, SCREW HOOKS, RIVETS, COTTERS, COTTER-PMILAR ARTICLES | 18% | 01/07/2017 | ||
| 76169100 | OTHER ARTICLES OF ALUMINIUM – OTHER : CLOTH, GRILL, NETTING AND FENCING, OF ALUMINIUM WIRE | 18% | 01/07/2017 | ||
| 761699 | OTHER | 18% | 01/07/2017 | ||
| 76169910 | OTHER ARTICLES OF ALUMINIUM – OTHER : OTHER : EXPANDED METAL OF ALUMINIUM AND ALUMINIUM ALLOYS | 18% | 01/07/2017 | ||
| 76169920 | OTHER ARTICLES OF ALUMINIUM – OTHER : OTHER :CHAINS | 18% | 01/07/2017 | ||
| 76169930 | OTHER ARTICLES OF ALUMINIUM – OTHER : OTHER : BOBBINS | 18% | 01/07/2017 | ||
| 76169990 | OTHER ARTICLES OF ALUMINIUM – OTHER : OTHER : OTHER | 18% | 01/07/2017 |
Visited 153 Times, 1 Visit today